Bathtub Push Drain Stopper Repair

Loading...

bathtub push drain stopper repair

Tub Drain Stopper Push Amp Pull AZ Partsmaster

with the stopper in the open position like you are emptying your tub hold the shaft cylinder of the stopper and turn the top counterclockwise if this action causes the shaft cylinder to also want to turn then release your hold on the shaft cylinder and continue to unscrew the stopper, a flipit tub stopper is easily installed with no tools required  a toggle lever attached right to the top of the stopper is moved from side to side to close and open the stopper to install this type of stopper you just push it into the drain the builtin orings hold it in place and make a watertight seal continue to 5 of 6 below, watco push pull bathtub stopper with s 38 in and 516 in combo pin adapter this bathtub stopper is great for a repair upgrade or to replace bathtub drain will need to have cross bars with either a 38 or 516 in diameter for the pin adapter to thread into the drain this watco stopper is a great addition to existing bathtub accessories

Loading...

this tub drain repair guide will help you get your tub or shower draining properly to change the setting of the drain push it down with your foot the trip lever opens and closes the drain by moving the stopper up and down plunger plunger drains dont have a visible stopper the trip lever opens and closes the drain by moving a , lift out the drain plug assembly after removing the peg or screw clean all debris hair and soap scum from the cross bars in the drain replace the drain stopper by inserting the new stopper assembly into the drain and turning it in a clockwise direction, push this stopper with your toe to engage it then press again to release it when you have a toetouch drain stopper theres no need to bend over simply push on the drain cap with your toe to close the drain and push again to open it a rubber seal attached to the cap stops the water when the drain is closed

Loading...